A. Additional Information
A.1. Document Revision History for the Intel Arria 10 FPGA
Development Kit User Guide
Document
Version
Changes
2023.07.12 • Retitled the document from Arria 10 FPGA Development Kit User Guide to Intel Arria 10 FPGA
Development Kit User Guide.
• Minor text edits.
2023.07.11 Updated the supported I/O standard for X1 and X2 in Table: On-Board Oscillators.
2021.03.19 Updated Board Overview on page 55 [J14 - DDR4 memory (x72) 1200 MHz]
2017.09.21 Updated contents of FACTORY switch in SW6 DIP Switch Default Settings Table in Default Switch and
Jumper Settings on page 12.
2017.08.08 Added a Caution note to Handling the Board on page 7.
2017.07.25 • Updated FMC on page 86 of Board Components.
• Changed all 1.4V PCML I/O Standard to "High Speed Differential I/O" throughout the User Guide.
• Updated Development Kit Package on page 9 section to remove references to installer.
2016.05.02 • Added "Programming the Flash Using Quartus Programmer" section.
• Updated the Arria 10 FPGA Development Kit block diagram.
2016.03.18 Production release.
683526 | 2023.07.12
Send Feedback
Intel Corporation. All rights reserved. Intel, the Intel logo, and other Intel marks are trademarks of Intel
Corporation or its subsidiaries. Intel warrants performance of its FPGA and semiconductor products to current
specifications in accordance with Intel's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Intel assumes no responsibility or liability arising out of the
application or use of any information, product, or service described herein except as expressly agreed to in
writing by Intel. Intel customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2015
Registered