Intermec EasyCoder PX4i User Manual

Appendix A — Technical Data
EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version) 139
Firmware
Operating System Intermec
Fingerprint v8.30
Incl. Direct Protocol
Smooth Fonts True Doc and
TrueType fonts
Resident scalable fonts 15 Unicode fonts
See Note 1
Resident bar codes 59
Startup Program (std) Intermec Shell v8.2
Note 1: Latin, Greek, and Cyrillic fonts according to Unicode standard
are included.
Physical Measurements
Dimensions (W × L × H) 275 × 482 × 238 mm
(10.8 × 19.0 × 9.4 in)
Weight (excluding media) 12.85 kg (28.4 lb)
Ambient Operating
Te mp e ra tu re
+5°C to +40°C (+41°F to +104°F)
Storage Temperature -20°C to +70°C
(-4°F to +152°F)
Humidity 10 to 90% non-condensing
Electronics
Microprocessor 32 bit RISC
On-board Flash SIMMs 2 sockets for 4 MB or 8 MB each
Standard 1 x 4 MB
On-board SDRAM SIMM 1 socket for 16 MB Standard
16 MB
Power Supply
AC Voltage 90 to 265 VAC, 45 to 65 Hz
PFC Regulation IEC 61000-3-2
Power Consumption Minimum 20 W; Continuous printing,
average 125 W; Peak 400 W

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g