Intermec EasyCoder PX4i User Manual

Appendix D — Intermec Supplies
EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version) 167
TTR High Gloss
White
84 25 0 300 300
TTR
Polyethylene
69 25 0 300 300
TTR Gloss
Polyethylene
80 25 0 300 300
HP05 TTR Coated 84 25 0 250 250
TTR Premium 74 25 0 250 250
TTR Premium
Board
4
92 25 0 250 250
TTR High Gloss
White
85 25 0 250 250
TTR Polethylene 69 25 0 250 250
TTR Gloss
Polyethylene
80 25 0 250 250
HR03 TTR High Gloss
Polyester
83 25 0 150 225
1. Exceeding the recommended print speed may cause the printhead to wear out prematurely. If
the ambient temperature is lower than =15°C (+59°F), decrease print speed by 50 mm/sec.
2. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3. Applies to ladder bar codes.
4. Requires high printhead pressure (See “Printhead Pressure” on page 131).
Thermal Transfer Printing; 11.81 dots/mm (300 dpi) (continued)
Type/Speed Name
Ribbon
Constant
Ribbon
Factor
Label
Offset
Max Rec.
Dir 1&3
2
Print Speed
1
Dir 2&4
3

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g