Intermec EasyCoder PX4i User Manual

Chapter 4 — Loading Media
44 EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
8 Route the media underneath the slack absorber and forward
towards the print mechanism. The slack absorber can be
rotated for better access and then snap-locked in open
position.
9 Route the media through the print unit and push it inwards
as far as it will go.
10 Pull out approximately 40 cm (15 in) of labels.
EasyCoder
PX4i
40 cm/15 in

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g