Intermec EasyCoder PX4i - Paper Type Settings

Chapter 5 — Loading Ribbon for Thermal Transfer Printing
EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version) 55
c If your ribbon is 110 mm (4.3 in) wide, compress the ribbon
supply bobbin and move it so it snaps into the third
(outermost) groove.
4 Press the ribbon roll onto the ribbon supply bobbin (1) and
route the ribbon through the print unit. Pull out 20 cm (8 in)
of ribbon.
1.
EasyCo
d
e
r
PX
4
i
2.