Interroll 24-V/48-V Roller Conveyor
RM 8310/8310 DF, RM 8320/8320 DF, RM 8330/8330 DF
30 Version 1.5 (07/2020) en
Translation of original operating instructions
Transport and storage
Transport
WARNING
Risk of injury during transport
4 Fix the module securely and slip-proof for the transport.
4 Ensure that the lifting device (crane, fork lift, etc.) is rated for the weight of the module.
4 Ensure that no persons are located under the suspended load while lifting and moving
the module.
Additional information about the transport are located on an information sheet that
accompanies the motor.
4 Data about weight and requirements for load lifting and securing equipment are listed on
the enclosed information sheet.
4 Remove any persons from the danger zone.
4 Wear safety shoes.
4 Check correct fastening for transport.
4 Avoid strong impacts during transport.
4 Do not expose the module to strong temperature fluctuations since these could damage the
electrical components.
The load lifting points are marked on the packet. Individual modules must be gripped at the
bottom profile edge, at the ends. Gripping at the top edge is not allowed since it can cause
inaccuracies of the sensors.
Identification of
load lifting points
After the delivery
4 Inspect module for transport damages.
4 Immediately notify the carrier and manufacturer in case of damages to avoid losing any
claims for compensation.
To Next Page
Loading...