Interroll 24-V/48-V Roller Conveyor
RM 8310/8310 DF, RM 8320/8320 DF, RM 8330/8330 DF
6 Version 1.5 (07/2020) en
Translation of original operating instructions
Introduction
Notes about working with the installation and operating instructions
The Interroll 24 V/48 V Roller Conveyor RM 8310/RM 8320/RM 8330 product is generally
referred to as "module" in this document.
Contents of these
installation and
operating instructions
These installation and operating instructions contain important notes and information about the
various operating phases of the module:
• Transport, assembly and startup
• Safe operation, required maintenance tasks, removal of any faults
• Spare parts, supplementary accessories
Integrated part of
the product
The installation and operating instructions describe the module at the time of its initial delivery
after manufacturing.
In addition to these installation and operating instructions, special contractual agreements and
technical documents apply to special versions of the module and its additional equipment.
Installation and operating
instructions are part of
the module
4 To ensure trouble-free and safe operation, as well as the settlement of possible warranty
claims, always read these installation and operating instructions first and observe all
information contained herein.
4 Keep the installation and operating instructions close to the module.
4 Pass the installation and operating instructions on to any subsequent operator or occupant.
Interroll does not accept any liability for faults or defects due to non-observance of these
installation and operating instructions.
4 If you have any questions after reading the installation and operating instructions, please
contact Interroll customer service. Contact persons near you can be found on the Internet
under: www.interroll.com/contact.
To Next Page
Loading...