Interroll 24-V/48-V Roller Conveyor
RM 8310/8310 DF, RM 8320/8320 DF, RM 8330/8330 DF
Maintenance and repair
Version 1.5 (07/2020) en
Translation of original operating instructions
57
Requirement:
R The module is out of service.
4 Remove the roller clip (2) using needle-nose pliers.
4 Slightly turn carrying idler (3) horizontally.
4 Remove drive belt (4) from carrying idler.
4 Lift and remove the carrying idler.
4 Place a new carrying idler in the open elongated hole. Pull the drive belt onto the carrying
idler in the process.
4 Insert the roller clip until it snaps into place.
To Next Page
Loading...