INVT GD200-037G/045P-4 - Page 109

Goodrive200 inverters Function codes
108
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
1:UP/DOWN terminals setting valid
LED tens: frequency control selection
0:Only valid when P00.06=0 or P00.07=0
1:All frequency means are valid
2:When the multi-step are priority, it is invalid to
the multi-step
LED hundreds: action selection when stop
0:Setting valid
1: Valid in the running, clear after stop
2: Valid in the running, clear after receiving the
stop commands
P08.45
UP
terminals
frequency
increasing
integral
ratio
0.01~50.00Hz/s
0.50
Hz/s
○
P08.46
DOWN
terminals
frequency
integral
ratio
0.01~50.00 Hz/s
0.50
Hz/s
○
P08.47
Action
when the
frequency
setting is
off
0x000~0x111
LED ones: Action selection when power off.
0:Save when power off
1:Clear when power off
LED tens: Action selection when MODBUS set
frequency off
0:Save when power off
1:Clear when power off
LED hundreds:The action selection when other
0x000
○