Goodrive200 inverters Basic operation instruction
164
minimum values can be adjusted. The analog output signals can be proportional to motor speed,
output frequency, output current, motor torque, motor power, etc.
Output instructions:
Set value
Function Instructions
0 Running frequency 0~the Max. output frequency
1 Set frequency 0~ the Max. output frequency
2 Ramp reference frequency
0~ the Max. output frequency
3 Running rotation speed
0~2 times of the rated synchronous rotation speed of
the motor
4
Output current
(relative to the inverter)
0~2 times of the rated current of the inverter
5
Output current
(relative to the motor)
0~2 times of the rated current of the inverter
6 Output voltage 0~1.5 times of the rated voltage of the inverter
7 Output power 0~2 times of the rated power
8 Setting torque 0~2 times of the rated current of the motor
To Next Page
Loading...
Need help?
General