INVT GD200-037G/045P-4 - Page 69

Goodrive200 inverters Function codes
68
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
starting process.
The setting time:0.000~10.000s
P03.26
Weak
magnetic
proportion
al gain
0~8000
Note: P03.24~P03.26 are invalid for vector
mode.
1000 ○
P03.27
Vector
control
speed
0: Display the actual value
1: Display the setting value
0 ○
P03.28
Compensa
tion
coefficient
of static
friction
0.0~100.0%
Adjust P03.28 to compensate the coefficient of
static friction. Only valid when setting in 1Hz.
0.0% ○
P03.29
Compensa
tion
coefficient
of dynamic
friction
0.0~100.0%
Adjust P03.29 to compensate the coefficient of
static friction. Only valid when setting in 1Hz.
0.0% ○
P04 Group SVPWM control
P04.00
Motor 1
V/F curve
setting
These function codes define the V/F curve of
Goodrive200 motor 1, and meet the need of
different loads.
0:Straight line V/F curve；applying to the constant
torque load
1:Multi-dots V/F curve
2:1.3
th
power low torque V/F curve
3:1.7
th
power low torque V/F curve
4:2.0
th
power low torque V/F curve
Curves 2~4 apply to the torque loads such as
fans and water pumps. Users can adjust
0 ◎