INVT GD270-030-4 - Page 164

Goodrive270 series VFD for fan and pump Function parameter list
-154-
Function
code
Name Description Default
Modify
P05.04
Function of S4.
Note: You cannot
select both S4
output and Y1 output
at the same time.
3: Three
-wire running control
4: Jog forward
5: Jog reversely
6: Coast to stop
7: Reset
faults
8: Pause running
9: External fault input
10: Increase frequency setting (UP)
11: Decrease frequency setting (DOWN)
12: Clear the frequency increase/decrease
setting
13: Switch between A setting and B setting
14: Switch between combination setting an
d A
setting
15: Switch between combination setting and B
setting
16: Multi
-step speed terminal 1
17: Multi
-step speed terminal 2
18: Multi
-step speed terminal 3
19: Multi
-step speed terminal 4
20: Pause multi
-step speed running
21: ACC/DEC time selection 1
22: ACC/DEC time selection 2
23: Simple PLC stop reset
24: Pause simple PLC
25: Pause PID control
26: Pause wobbling frequency
27: Reset wobbling frequency
28: Counter reset
29: Switch between speed control and torque
control
30: Disable ACC/DEC
31: Trigg
er the counter
32: Reserved
33: Clear the frequency increase/decrease
setting temporarily
34: DC braking
35: Switch from motor 1 to motor 2
0 Ƽ
P05.05 Function of HDIA 0 Ƽ
P05.06 Reserved 0 Ƽ