INVT GD270-030-4 - Single-Unit Installation; Multiple-VFD Installation

Goodrive270 series VFD for fan and pump Installation guidelines
-16-
4.2.4 Single-unit installation
Cold air
Hot air
C
C
A
B
A
B
Figure 4-3 Single-VFD installation
Note: For clearances B and C, each must be 100mm at least.
4.2.5 Multiple-VFD installation
Hot air
Cold air
C
C
A
A
B B
D
Figure 4-4 Parallel installation
Note:
 When you install VFDs in different sizes, align the top of each VFD before installation for the
convenience of future maintenance.
 For clearances B, D and C, each must be 100mm at least.