INVT GD270-030-4 - VFD Category of C2; VFD Category of C3

Goodrive270 series VFD for fan and pump Technical data
-307-
systems in environments of Category II.
B.6.1 VFD category of C2
The induction disturbance limit meets the following stipulations:
 Select an optional EMC filter according to Appendix D Optional peripheral accessories and install
it following the description in the EMC filter manual.
 Select the motor and control cables according to the description in the manual.
 Install the VFD according to the description in the manual.
For the max. motor cable length, see section B.4.1 EMC compatibility and motor cable length.
 The VFD may generate radio interference, you need to take measures to
reduce the interference.
B.6.2 VFD category of C3
The anti-interference performance of the VFD meets the requirements of the second environment in
the IEC/EN 61800-3 standard.
The induction disturbance limit meets the following stipulations:
 Select an optional EMC filter according to Appendix D Optional peripheral accessories and install
it following the description in the EMC filter manual.
 Select the motor and control cables according to the description in the manual.
 Install the VFD according to the description in the manual.
For the max. motor cable length, see section B.4.1 EMC compatibility and motor cable length.
 VFDs of category C3 cannot be applied to civilian low-voltage common grids.
When applied to such grids, the VFDs may generate radio frequency
electromagnetic interference.