INVT GD270-030-4 User Manual

Goodrive270 series VFD for fan and pump Troubleshooting
-246-
Fault
code
Fault type Possible cause Solution
occurs at next power-on;
Check whether the insertion port
is damaged, if yes, replace the
insertion port after power-off.
C2-Er
Communication
timeout occurred to
the expansion card
in card slot 2
There is no data
transmission in interfaces
of card slot 2.
Check whether the expansion
card at this slot is supported.
Stabilize the expansion card
interfaces after power-off, and
confirm whether a fault still
occurs at next power-on;
Check whether the insertion port
is damaged, if yes, replace the
insertion port after power-off.
E-DP
PROFIBUS card
communication
timeout fault
There is no data
transmission between the
communication card and
the host computer (or
PLC).
Check whether the
communication card wiring is
loose or dropped.
E-NET
Ethernet card
communication
timeout fault
There is no data
transmission between the
communication card and
the host computer.
Check whether the
communication card wiring is
loose or dropped.
E-CAN
CANopen card
communication
timeout fault
There is no data
transmission between the
communication card and
the host computer (or
PLC).
Check whether the
communication card wiring is
loose or dropped.
E-PN
PROFINET card
communication
timeout fault
There is no data
transmission between the
communication card and
the host computer (or
PLC).
Check whether the
communication card wiring is
loose or dropped.
E-CAT
EtherCAT card
communication
timeout fault
There is no data
transmission between the
communication card and
the host computer (or
PLC).
Check whether the
communication card wiring is
loose or dropped.

INVT GD270-030-4 Specifications

General

Brand	INVT
Model	GD270-030-4
Category	Water Pump
Language	English