Goodrive30 Series VFD Function parameter list
-108-
Range: -300.0–300.0% (relative to rated motor
power)
Displays current output torque of the VFD; 100%
relative to rated motor torque, during forward
running, positive value is motoring state,
negative value is generating state, during
reverse running, positive value is generating
state, negative value is motoring state.
Range: -250.0–250.0%
Estimated
motor
frequency
Displays the estimated motor rotor frequency
under open-loop vector condition.
Range: 0.00– P00.03
Displays current DC bus voltage of the VFD.
Range: 0.0–2000.0V
Digital input
terminal
state
Displays current digital input terminal state of the
VFD.
Digital
output
terminal
state
Displays current digital output terminal state of
the VFD.
Displays the adjustment value of the keypad.
Range: 0.00Hz–P00.03
Relative to percentage of the rated torque of
current motor, display torque reference.
Range: -300.0%–+300.0% (of the motor rated
current)
Displays the current linear speed of the VFD.
Range: 0–65535
To Next Page
Loading...
Need help?
General