INVT Goodrive30 VFD Series User Manual

Goodrive30 Series VFD Function parameter list
-73-
Function
code
Name
Description
Default
Modify
P06.18
AO1 output
correspondi
ng to lower
limit
range, the output uses the lower limit or upper
limit.
When the analog output is current output, 1mA
equals 0.5V.
In different cases, the corresponding analog
output of 100% of the output value is different.
See each application for detailed information.
10V (20mA)
0.0% 100.0%
AO
Setting range of P06.17: -100.0%–P06.19
Setting range of P06.18: 0.00–10.00V
Setting range of P06.19: P06.17–100.0%
Setting range of P06.20: 0.00V–10.00V
Setting range of P06.21: 0.000–10.000s
Setting range of P06.22: -100.0%–P06.24
Setting range of P06.23: 0.00–10.00V
Setting range of P06.24: P06.22–100.0%
Setting range of P06.25: 0.00–10.00V
Setting range of P06.26: 0.000–10.000s
0.00V
○
P06.19
Upper limit
of AO1
output
100.0%
○
P06.20
AO1 output
correspondi
ng to upper
limit
10.00V
○
P06.21
AO1 output
filter time
0.000s
○
P06.22
Lower limit
of AO2
output
0.0%
○
P06.23
AO2 output
corrspondin
g to lower
limit
0.00V
○
P06.24
Upper limit
of AO2
output
100.0%
○
P06.25
AO2 output
correspondi
ng to upper
limit
10.00V
○
P06.26
AO2 output
filter time
0.000s
○
P07 group HMI
Function
code
Name
Description
Default
Modify
P07.00
User
password
0–65535
When you set the function code to a non-zero
number, password protection is enabled.
If you set the function code to 00000, the
previous user password is cleared and password
0
○

INVT Goodrive30 VFD Series Specifications

General

Brand	INVT
Model	Goodrive30 VFD Series
Category	Inverter
Language	English