INVT Goodrive30 VFD Series

Goodrive30 Series VFD Function parameter list
-59-
Function
code
Name
Description
Default
Modify
factor of
motor 1
running, or even VFD overcurrent. You can
adjust the two function codes properly to
eliminate such phenomenon.
Setting range of P04.10: 0–100
Setting range of P04.11: 0–100
Setting range of P04.12: 0.00Hz–P00.03 (Max.
output frequency)
P04.11
High
frequency
vibration
control
factor of
motor 1
10
○
P04.12
Vibration
control
threshold of
motor 1
30.00 Hz
○
P04.13
V/F curve
setting of
motor 2
This group of function code defines the V/F curve
of motor 2 to meet the needs of different loads.
For details, see P04.00 and P04.12.
Note: P04 group includes two sets of motor V/F
parameters which can be displayed
simultaneously, but only valid for the selected
motor. The motor selection can be determined by
the terminal function 35 "Switch motor 1 to motor
2".
0
◎
P04.14
Torque
boost of
motor 2
0.0%
○
P04.15
Torque
boost
cut-off of
motor 2
20.0%
○
P04.16
V/F
frequency
point 1 of
motor 2
0.00Hz
○
P04.17
V/F voltage
point 1 of
motor 2
00.0%
○
P04.18
V/F
frequency
point 2 of
motor 2
00.00Hz
○
P04.19
V/F voltage
point 2 of
motor 2
00.0%
○
P04.20
V/F
frequency
00.00Hz
○