INVT Goodrive30 VFD Series - Page 85

Goodrive30 Series VFD Function parameter list
-79-
Function
code
Name
Description
Default
Modify
12: VFD overload (OL2)
13: Phase loss on input side(SPI)
14: Phase loss on output side (SPO)
15: Rectifier module overheat(OH1)
16: Inverter module overheat (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Braking unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication error (PCE)
27: Parameter upload error (UPE)
28: Parameter download error (DNE)
29–31: Reserved
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment fault (STo)
36: Underload fault (LL)
P07.33
Running
frequency
at present
fault
0.00Hz
●
P07.34
Ramp
reference
frequency
at
present
fault
0.00Hz
●
P07.35
Output
voltage at
present
fault
0V
●