ISHIDA IP-AI - Plu Detail (Wrap) Registration

4-11
Data Registration
■REGISTRATION METHOD FOR EACH ITEM
Select the required registration item and enter the details.
ITEM DESCRIPTIONS
TRAY NO. Enter a desired format number and press this fi eld.
WRAP MODE Press [<] or [>] to select WRAP MODE.
1:Wrap + Label
2:Label
3:Wrap
VOLUME Press [<] or [>] to select the fi lling height.
0: None
1:Low
2:Middle
3:High
4:Auto
PASTE MODE Press [<] or [>] to select PASTE MODE.
1: Auto
2: Manual
DIRECTION Press [<] or [>] to select the labeling direction.
0:Normal Paste
1:Horizontal Paste
2:Vertical Paste
TRAY VOL. DETECT Press [<] or [>] to select TRAY VOLUME DETECT.
0:Select
1:Auto
FEED SPEED Press [<] or [>] to select FEED SPEED.
0:Tray Reference
1:High
2:Middle
3:Low
WRAP SPEED Press [<] or [>] to select WRAP SPEED.
0:Tray Reference
1:High
2:Middle
3:Low
TRAY AUTO DETECT Press [YES] or [NO] in this fi eld to select whether or not to detect
the tray automatically.
TRAY AUTO
CENTERING
Press [YES] or [NO] in this fi eld to select whether or not to center
the tray automatically.
TRAY HOLD Press [<] or [>] to select TRAY HOLD.
0:Tray Reference
1:No
2:Yes
4.2.7 PLU DETAIL (WRAP) REGISTRATION
Returns to the PLU List screen.