VII
Neutral
Detergent
Thiner
Benzine
Alcohol
Sodium
Hypochlorite
• When cleaning, wipe the machine
using a cloth wrung out of water or
neutral detergents.
Do not use thinners as they may lead to failure,
malfunction or deformation.
Do not spray water or detergent solution over the
machine.
• Perform a start-up inspection
(weighing check) using a weight or
the like once a day.
For the purchase of weights, please contact your
ISHIDA dealer.
• Entrust the installation of the machine
to your ISHIDA dealer.
• Do not remove the side cover of
the printer unit.
Doing so may result in malfunction or break-
down of the machine.
• Avoid installing in the following
locations where deterioration in
performance, or shortened life may
result.
• Locations subject to low
temperature and low humidity, or
high temperature and high humidity
• Locations exposed to direct sunlight
• Locations subject to splashing
water.
• Locations in a special environment
different from usual
To Next Page
Loading...
Need help?
General
