ITech IT7900 Series Programming Guide

SURGesag Subsystem
Copyright © ITECH Electronic Co., Ltd. 108
Example
SURGesag: PERiod:COUNt 5 //set the period interval of the surge/trap wave
occurrence to 5.
SURGesag:VALue:SELect <mode>
This command is used to set and query the setting mode of the surge/trap wave
droping value.
<mode>: the expression mode of the surge/trap wave droping value
PERCent|SETTing
Syntax
SURGesag:VALue:SELect <mode>
Argument
PERCent|SETTing
*RST
PERCent
Query syntax
SURGesag:VALue:SELect <mode>
Returns
PERCent|SETTing
Example
SURGesag:VALue:SELect PERcent //Set the mode of the drop value to
percent
SURGesag:VALue:SELect?
SURGesag:VALue:PERCent <NRf+>
This command is used to set and query the percentage of the drop value of the
surge/trap wave.
<NRf+>: dropping percentage setting value.
Syntax
SURGesag:VALue:PERCent <NRf+>
Argument
<NRf+>
*RST
0

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English