ITech IT7900 Series

Output Commands
Copyright © ITECH Electronic Co., Ltd. 53
Arguments:
MINimum|MAXimum|DEFault
Query syntax:
OUTPut:OFF:PHASe:LEVel?
Returns:
MINimum|MAXimum|DEFault
Example
OUTP:OFF:PHAS:LEV 45
OUTPut:BALance[:STATe] <CPD>
In the three-phase mode, it is used to set and query the state of the output
balance mode.
Syntax:
OUTPut:BALance[:STATe] <CPD>
Arguments:
0|OFF|1|ON
Query syntax:
OUTPut:BALance[:STATe]?
Returns:
0|OFF|1|ON
Example
OUTP:BAL ON