ITech IT7900 Series - [Source:]Current[:Level][:Immediate][:Amplitude][:Ac] Nrf+[,Nrf+][,Nrf+]; [Source:]Current[:Level][:Immediate][:Amplitude]:DC Nrf+,[Nrf+],[Nrf+]

SOURce Commands
Copyright © ITECH Electronic Co., Ltd. 34
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude][:A
C] <NRf+>[,NRf+][,NRf+]
Set and query the upper limit of RMS current, which has the same function as the
command [SOURce:]CURRent:LIMit:HIGH <NRf+> [,CH1|CH2|CH3].
Syntax:
CURRent[:LEVel][:IMMediate][:AMPLitude][:AC] <NRf+>[,NRf+][,NRf+]
Arguments:
<NRf+>
MAXimum|MINimum|DEFault
Query syntax:
CURRent[:LEVel][:IMMediate][:AMPLitude][:AC]?
Returns:
MAXimum|MINimum|DEFault
Related syntax:
[SOURce:]CURRent:LIMit:HIGH <NRf+> [,CH1|CH2|CH3]
Example:
CURR 30 //Under single mode, set the current RMS to 30A
CURR 30,20,10 //Under multi-channel or 3-three phase mode, set the current
RMS to 30A,20A,10A
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]:D
C <NRf+>,[NRf+],[NRf+]
DC current limit value setting command in normal mode.
<NRf+>: DC current setting value.
Syntax:
CURRent[:LEVel][:IMMediate][:AMPLitude]:DC <NRf+>,[NRf+],[NRf+]
Query syntax:
CURRent[:LEVel][:IMMediate][:AMPLitude]:DC?
Returns
<NRf+>
Example:
CURRent:DC 30