ITech IT7900 Series

STATus Commands
Copyright © ITECH Electronic Co., Ltd. 119
Arguments
0-0x7fffffff
Default value
0
Example
STAT:QUES:NTR 128
Query syntax
STATus:QUEStionable:NTRansition?
Returns
<NR1> This is a decimal value with a binary weighted sum.
STATus:QUEStionable:PTRansition
Sets the value of the PTR (Positive-Transition) registers. These registers
serve as a polarity filter between the Questionable Condition and
Questionable Event registers. When a bit in the PTR register is set to 1,
then a 0-to-1 transition of the corresponding bit in the Questionable
Condition register causes that bit in the Questionable Event register to be
set. STATus:PRESet sets all bits in the PTR registers and clears all bits in
the NTR registers.
Syntax
STATus:QUEStionable:PTRansition <NR1>
Arguments
0-0x7fffffff
Default value
0
Example
STAT:QUES:PTR 128
Query syntax
STATus:QUEStionable:PTRansition?
Returns
<NR1> This is a decimal value with a binary weighted sum.
STATus:OPERation[:EVENt]?
This command can read the parameter from operation event register. After
executing this order, operation event register is reset.