ITech IT7900 Series

Output Commands
Copyright © ITECH Electronic Co., Ltd. 50
OUTPut:IMPedance:RESistance:LEVel
<NRf+>[,A|B|C|CH1|CH2|CH3]
Set and query the resistance value of the output impedance. It is valid after the
output impedance function is turned on.
Syntax:
OUTPut:IMPedance:RESistance:LEVel <NRf+>[,A|B|C|CH1|CH2|CH3]
Arguments:
MINimum|MAXimum|DEFault
Query syntax:
OUTPut:IMPedance:RESistance:LEVel? [A|B|C|CH1|CH2|CH3]
Returns:
MINimum|MAXimum|DEFault
Example:
OUTP:IMP:RES:LEV 10
OUTP:IMP:RES:LEV 100,A
OUTPut:IMPedance:INDuctance:LEVel
<NRf>[,A|B|C|CH1|CH2|CH3]
This command is used to set and query the output inductance value.
Syntax:
OUTPut:IMPedance:INDuctance:LEVel <NRf>[,A|B|C|CH1|CH2|CH3]
Arguments:
MINimum|MAXimum|DEFault
Query syntax:
OUTPut:IMPedance:INDuctance:LEVel? [A|B|C|CH1|CH2|CH3]
Returns:
MINimum|MAXimum|DEFault
Example
OUTP:IMP:IND:LEV 10
OUTP:IMP:IND:LEV 5,A