ITech IT7900 Series

SENSe Commands
Copyright © ITECH Electronic Co., Ltd. 54
Chapter6 SENSe Commands
SENSe[:REMote][:STATe] <CPD>
This command enables or disables the sense function.
Syntax:
SENSe[:REMote][:STATe] <CPD>
Arguments:
<OFF|ON|0|1>
Default value:
0|OFF
Query syntax:
SENSe[:REMote][:STATe]?
Returns:
<OFF|ON|0|1>
Example
SENS ON
SENSe:FILTer[:STATe] <CPD>
This command sets and queries the state of meter filter switch.
Syntax:
SENSe:FILTer[:STATe] <CPD>
Arguments:
0|OFF|1|ON
Query syntax:
SENSe:FILTer[:STATe]?
Returns:
0|OFF|1|ON
Example
SENSe:FILT OFF