ITech IT7900 Series

TRIGger Subsystem
Copyright © ITECH Electronic Co., Ltd. 82
TRIGger:SURGesag:SOURce <CPD>
This command is used to set and query the trigger source of the surge/trap wave
function.
Syntax
TRIGger:SURGesag:SOURce <CPD>
Argument
<CPD>
IMMediate|MANual|BUS|TRIG1|TRIG2
Query syntax
TRIGger:SURGesag:SOURce?
Returns
IMMediate|MANual|BUS|TRIG1|TRIG2
Example
TRIG:SURG:SOUR MAN
TRIGger:SCOPe:SOURce <CPD>
This command is used to set and query the trigger source of the oscilloscope
function.
Syntax
TRIGger:SCOPe:SOURce <CPD>
Argument
<CPD>
<1-6>|TRIG1|TRIG2
Query syntax
TRIGger:SCOPe:SOURce?
Example
TRIG:SCOP:SOUR TRIG1
TRIGger:SCOPe:MODE <CPD>
This command is used to set and query the mode of the oscilloscope function.
Syntax
TRIGger:SCOPe:MODE <CPD>