USER MANUAL
5.6.8.1 Upgrade IP Camera
1. Choose one of the IP cameras you want to upgrade firmware.
2. Click Select File select the update file from your USB flash drive, then click OK.
3. Click IPC Upgrade button to start upgrading. You will be required to input the Admin password
to authenticate. Please do NOT power off the NVR and IP camera or remove the USB during
the upgrading.
5.6.8.2 Load Default Settings for IP Camera
1. Choose the IP cameras you want to restore.
2. Click Load Default to restore settings. You will be required to input the Admin password to
authenticate.
5.6.9 System Information
This menu allows you to view the system information, channel information, record information &
network status.
To Next Page
Loading...