To Next PageTo Next Page
Need help?Do you have a question about the Ivsec NR308XB and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Video Input | 8 channels |
| Video Output | 1 channel (VGA/HDMI) |
| Audio Output | 1 channel |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Network | 1 RJ45 10M/100M self-adaptive Ethernet interface |
| USB | 2 USB 2.0 |
| Power Supply | 12V DC |
| Operating Temperature | -10 °C to +55 °C |
Compares specifications of different IVSEC NVR models.
Compares specifications for IVSEC Dome Camera models.
Compares specifications for IVSEC Bullet Camera models.
Compares specifications for IVSEC Fisheye and PTZ camera models.
Identifies and explains the rear panel ports of NVR models.
Describes the functions of the NVR's remote controller buttons.
Guide on how to install a hard disk drive (HDD) into the NVR.
Illustrates the NVR's connection diagram and ports.
Instructions on connecting the NVR's power supply.
Explains the functions of the NVR's mouse buttons and scroll wheel.
Details on using the on-screen virtual keyboard for input.
Guide on setting the initial login password for the NVR.
Procedures for recovering a forgotten NVR password.
Prerequisites for starting up the NVR and its initial setup.
Instructions on initiating the NVR's start-up wizard.
Steps for configuring the NVR's network settings, including DHCP.
How to set the NVR's date, time, NTP, and Daylight Saving Time.
Information on automatic configuration of IVSEC IP cameras.
Settings related to the NVR's internal hard disk drive (HDD).
How to select the NVR's output resolution for the monitor.
Details on accessing the NVR via the IVSEC X Mobile application.
Review of system summary information set during the start wizard.
Overview of the NVR's main start menu options.
How to lock and unlock the NVR screen for security.
Procedures for shutting down, rebooting, or logging out the NVR.
Introduction to the live video viewing interface.
Explains the functions of the camera quick toolbar in live view.
How to control PTZ (Pan-Tilt-Zoom) cameras connected to the NVR.
Description of the NVR's taskbar icons and their functions.
Managing video stream quality (Mainstream vs. Substream) in live view.
Configuring camera settings, live view, and managing IP cameras.
Editing RTSP protocols for IP camera connections.
Adjusting image settings for supported IP cameras.
Creating privacy zones to mask parts of the camera image.
Setting up PIR sensor-based motion detection for cameras.
Configuring deterrence features like spot light and siren.
Setting up motion detection alarm functions and notifications.
Overview of intelligent detection features like PID, LCD, SOD, etc.
Configuring general recording parameters for the NVR.
Configuring alarm parameters and event notifications.
Configuring NVR network parameters (DHCP, PPPoE).
Configuring internal HDD and device-related functions.
General system settings, date, time, region, passwords, and permissions.
Introduction to searching and playing recorded videos and snapshots.
Searching and playing back recordings based on a selected date.
Saving selected video segments to a USB flash drive.
Searching, playing, and backing up specific event recordings.
Controls for playback of event recordings.
Playing multiple recordings simultaneously from a single channel.
Searching, playing, and copying snapshot images to a USB drive.
Controls for previewing and managing snapshot images.
Minimum hardware and OS requirements for the web client.
Steps to download and install the web client plugin for browsers.
Overview of the web client interface for NVR control.
The initial screen in the web client for live preview and control.
Searching and playing recorded videos through the web client.
Remotely configuring NVR settings via the web client.
Setting download locations and file types in the web client.
Frequently asked questions related to the NVR and its features.
Guidelines for proper maintenance and care of the NVR.
