USER MANUAL
CHAPTER 10 APPENDIX ......................................................................................................................... 122
10.1 FAQ ....................................................................................................................................................... 122
10.2 USAGE MAINTENANCE ....................................................................................................................... 124
SAFETY INSTRUCTIONS
Please carefully read the following safety instructions.
1. Only use the power supply that was supplied with the NVR.
2. Ensure that the NVR is installed in a clean environment and is well ventilated. Blocking the
vents on the sides or rear of the NVR will restrict air flow and may cause the device to overheat.
3. Do not remove the NVR upper cover while the NVR is turned on.
Failure to adhere to these safety instructions may cause damage to your NVR. Please contact
your reseller for further assistance.
To Next Page
Loading...