USER MANUAL
Please note that the first point of contact should be your original System Installer
Alternatively, email service@ivsecurity.com.au or call 1300 368 348.
Note: When emailing or calling for Technical Support please provide:
Model and serial number of your IVSEC product
Where was the equipment purchased from (Business name and contact number)
Description of the issue you are experiencing
10.2 Usage Maintenance
1. To shut down NVR, please firstly shut down the system and then turn off the power. Do not
turn off the power directly or HDD data will be lost or damaged.
2. Please keep NVR away from heat sources or direct sunlight.
3. Clean dust around the NVR. Make sure the good ventilation of NVR so as to ensure the good
heat dissipation.
4. Do not plug audio or video cables into the NVR while it is turned on (hot plugging). Best price
is to have all required cables connected before powering on the NVR.
5. If you live in an area that experiences regular brown outs or black outs it is recommended that
you connect the NVR to an Uninterruptable Power Supply (UPS) that has surge protection.
Contact your for information regarding this product
To Previous Page
Loading...