USER MANUAL
DDNS: Check to enable DDNS.
Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP,
DNSEXIT).
Domain: Enter the domain name you created on the DDNS service provider’s web page. This will
be the address you type in the URL box when you want to connect remotely to the NVR via PC.
Fox example: NVR.no-ip.org.
User/Password: Enter the user name and password you obtained when creating an account on
the DDNS service provider’s web page.
After all parameters are entered, click Test DDNS to test the DDNS settings. If the test result is
“Network is unreachable or DNS is incorrect”, please check whether the network works fine, or the
DDNS information is correct or not.
5.4.3 Email
This menu allows you to configure email settings. Please complete these settings if you want to
receive the system notifications on your email when an alarm is triggered, HDD becomes full, HDD
is in error state, or Video Loss occurs.
To Next Page
Loading...