USER MANUAL
5.1.2 Protocol Manage
With the Protocol Manage, you can edit your own RTSP protocol for IP camera connection.
Custom Protocol: Protocol number
Protocol Name: To give a name to your custom protocol.
Enable Substream: Check the box if you want to enable sub-stream.
Type: Only RTSP is currently available.
Port: Input the RTSP port of your IP camera.
Resources Path: Input the RTSP address of your IP camera.
RTSP Strings of IVSEC X- Range Products
The default RTSP strings of IVSEC X-range cameras are:
Mainstream: rtsp://cameraipaddress/ch01/0
Substream: rtsp://cameraipaddress/ch01/1
Mobilestream (if supported by camera): rtsp://cameraipaddress/ch01/2
Default RTSP strings of IVSEC X-range NVR’s:
Mainstream (channel1): rtsp://NVRipaddress/ch01/0
Substream (channel1): rtsp://NVRipaddress/ch01/1
To Next Page
Loading...