USER MANUAL
5.6 System
Change general system information such as date, time and region, edit passwords and
permissions.
5.6.1 General
Device Name: Enter the desired name for your NVR. The name can include both letters and
numbers.
Device ID: Enter the desired ID for your NVR. The device ID is used to identify the NVR, and can
only be composed of numbers. For example, 2pcs NVRs are installed in the same place, the
Device ID is 000000 for one of the NVRs, and 111111 for another NVR. When you want to operate
the NVR with a remote controller, both of the NVR may receive the signal from controller & act at
the same time. If you want to control only the NVR with ID 111111, you can input the Device ID
111111 in login page with remote controller for further operations.
Language: Select a language you would like the system menus to be displayed in. Multiple
languages are available.
Video Format: Select the correct video standard for your region.
Menu Timeouts: Click the drop-down menu to select the time your NVR will exit the Main Menu
when idle. You can also disable this by selecting “OFF” (password protection will be temporarily
disabled).
Show Wizard: Click the checkbox if you would like to display the Startup Wizard each time you
turn on or reboot your NVR.
To Next Page