Operation
Storage of the Machine
93 93
9811-3400-4
5 Operate the hydraulic controls.
Make sure that the hydraulic functions operate
correctly.
6 Prepare the machine for storage. Refer to Put the
Machine into Storage.
Take the Machine Out of Storage
T2-079
1 Examine the coolant condition. Replace If necessary
2 Examine all fluid levels. Top up if necessary.
3 Clean the machine to remove unwanted material and
corrosives.
Remove the grease or petroleum jelly from the ram
piston rods.
4 Install a charged battery.
5 Start the engine.
6 Operate the hydraulic controls.
Make sure that the hydraulic functions operate
correctly.
To Next Page
Loading...
