Routine Maintenance
Hydraulic System
160 160
9811-3400-4
Oil and Filter
Checking the Fluid Level
426, 436
1 Make the machine safe with the loader arm lowered.
Refer to Prepare the Machine for Maintenance.
!MCAUTION
If the fluid is cloudy, then water or air has
contaminated the system. This could damage the
hydraulic pump. Contact your JCB Distributor
immediately.
12-5-1-4
2 The level should be visible in the sight glass A.
3 If necessary, top up with hydraulic fluid.
4 Open the right side engine panel. Refer to Access
Panels - Engine Covers.
5 Open filler cap B.
6 Top up the system with hydraulic fluid. K
Fluids,
Lubricants and Capacities ( T 108).
7 Refit filler cap B. Make sure it is secure.
8 Close the engine cover.
812170
Fig 114.
866840-2
Fig 115. 426, 436
To Next Page
Loading...
