Operation
Drive Controls, Switches and Instruments
36 36
9811-3400-4
Drive Controls, Switches and Instruments
Drive Controls
Steering Wheel
T2-048
Turn the steering wheel in the direction you want to go.
Steering Column Adjustment
!MWARNING
Make sure the steering column is locked in position.
Do not adjust the steering column while driving.
INT-2-1-16
Use the lever A to set the steering column to the correct
position for when you sit correctly on the operator seat.
T014600-1
Fig 22.
1 Hold the steering wheel then turn the lever A in a
counter clockwise direction to unlock the steering
column.
2 Adjust the steering wheel to the correct position (lift,
lower, tilt forward/backward).
3 Turn the lever A in a clockwise direction to lock the
steering column in position.
Note: The locked position of lever A can be altered - pull
the lever out and move to the required position.
Accelerator Pedal
T2-011
Push this pedal down to increase engine speed. Let the
pedal up to reduce engine speed. With your foot off the
pedal the engine will idle.
Foot Brake Pedal
T2-049_2
Push down on the brake pedals to slow or stop the
machine. Use the brakes to prevent overspeeding down a
slope.
The stop lights should come on when the brakes are
applied. Do not drive the machine unless both stop lights
work correctly.
To Next Page
Loading...
