Routine Maintenance
Too l s
113 113
9811-3400-4
Tools
Toolbox
Keep the tools in the toolbox A unless you need to use
them.
To get access to the toolbox, open an engine cover. Refer
to Access Panels, Engine Covers.
We recommend that you lock the toolbox to prevent theft
or tampering.
T034370-1
Fig 62.
Carrying Tools onto the Machine
When you carry tools onto the machine you must maintain
three points of contact with the machine at all times. Lift
tools onto the machine in intervals if necessary. Place the
tools down before you adjust your grips on the machine.
Do not try to adjust your grips on the machine while holding
tools.
To Next Page
Loading...
