jcb 426 - Functional Test and Final Inspection

Routine Maintenance
Service Schedules
106 106
9811-3400-4
Functional Test and Final Inspection
Table 14. Engine
Table 15. Transmission, Axles and Steering
Table 16. Hydraulics
Operation 10 50
100
(1)
(1) First 100 Hours Service only, to be completed by your JCB Distributor.
100 500 1000 2000
Idle Speed Check

Torque Converter Stall Speed Check

Combined Stall Speed Check

Maximum No Load Speed Check

Throttle System Check

Exhaust Smoke Check

Exhaust System Security Check

Air Inlet System Security Check

Coolant System for Leaks Check

Operation 10 50
100
(1)
(1) First 100 Hours Service only, to be completed by your JCB Distributor.
100 500 1000 2000
Transmission Operation Check
     
Forward/Reverse/Speed Range
Operation
Check
     
Neutral Start Operation Check
     
Oil Cooler and Pipe-Work Check

Steering Operation Check
     
Operation 10 50
100
(1)
(1) First 100 Hours Service only, to be completed by your JCB Distributor.
100 500 1000 2000
Hoses for Damage and Leaks Check

Pipe-Work for Damage and Leaks Check

Piston Rods and Gland Seals Check
