Routine Maintenance
Tyres and Wheels
177 177
9811-3400-4
Checking the Wheel Nut Torques
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
On new machines, and whenever a wheel has been
removed, check the wheel nut torques every two hours
until they stay correct.
Every day, before starting work, check that the wheel nuts
are tight.
The correct torque are shown.
Table 24. Torque Settings
Front Rear
Nm lbf ft Nm lbf ft
600 443 600 443
To Next Page
Loading...
