Routine Maintenance
Heater and Air Conditioning
133 133
9811-3400-4
Heater and Air Conditioning
Cleaning the Air Intake Filter
P4-3008
!MCAUTION
The filter may be filled with dust. Wear goggles and a
face mask when removing the filter.
2-3-3-6
1 Make the machine safe with the loader arm lowered.
Refer to Prepare the Machine for Maintenance.
2 To gain access to the cab heater air filter A, open
heater door. Refer to Access Panels, Heater Door.
3 Open fasteners at B, remove cover C .
4 Remove filter A and shake out the loose dust and
clean using low pressure compressed air. Renew the
filter if damaged.
Note: An additional filter D may be fitted behind filter A, if
applicable, remove filter D by pulling tag provided.
Magnetic strips hold the filter in place. Refit the filter
making sure it is located correctly. Renew the filter if
damaged.
5 Refit filter A, close heater door.
802270
Fig 79.
C028560
Fig 80.
A
D
To Next Page
Loading...
