Introduction
Safety Labels
18 18
9811-3400-4
Part Numbers and Descriptions
ISO-01A
817-70014-3
Part Number: 817/70014
Description: Warning. Read the
operator manual before you operate
the machine.
ISO-02C
332-P7181-1
Part Number: 332/P7181
Description: Crushing of whole body.
Install the articulation lock before you
start maintenance work. Refer to
Articulation Lock (Operation
Section).
ISO-03B
817-70024-2
Part Number: 817/70024
Description: Warning. Do not use as a
step.
ISO-04A
Part Number: 332/P7128
Description: Burns to fingers and hands. Stay a safe
distance away.
332-P7128-1
ISO-05C
Part Number: 332/P7129
Description: Runover. Start the engine from the operator
seat only. Do not short across the terminals.
332-P7129-1
ISO-06B
Part Number: 332/P7131
Description: Pressure hazard. Refer to Cooling System
(Routine Maintenance Section).
332-P7131-1
ISO-06C
817-70002-2
Part Number: 817/70002
Description: Pressure hazard. Stop
the engine, remove the starter key
and refer to Releasing the Hydraulic
Pressure (Routine Maintenance
Section) before you start
maintenance work.
ISO-07C
817-70008-2
Part Number: 817/70008
Description: Crushing of whole body.
Keep a safe distance from the
machine.
To Next Page
Loading...
