Operation
Visibility Aids
30 30
9811-3400-4
Visibility Aids
Mirrors
Introduction
When operating the machine the operator must continually
survey their field of vision. It is important that the mirrors
are securely fitted and give maximum vision around the
machine.
When a mirror is provided to supplement the operators
direct field of vision, it must be adjusted to serve as an aid
to the operator in seeing people or obstacles around the
machine. The mirror provides indirect vision to hidden
areas and improves the effectiveness of the machines
usage.
812110-4
Fig 18.
Adjusting the Mirror
T2-054
1 Adjust the seat to suit the operator.
2 Adjust the mirror(s) to suit your specific working
requirements before you drive or operate the
machine.
3 Check that the field of vision A can be seen. Refer to
Checking the Field of Vision.
1 Rear View Mirror
2 Side Mirrors
3 Rear Mirror
To Next Page
Loading...
