jcb 426 - Cleaning the Re-Circulation Filter (if Fitted)

Routine Maintenance
Heater and Air Conditioning
134 134
9811-3400-4
Cleaning the Re-Circulation Filter (if
fitted)
P4-3019
!MCAUTION
The filter may be filled with dust. Wear goggles and a
face mask when removing the filter.
2-3-3-6
1 Make the machine safe with the loader arm lowered.
Refer to Prepare the Machine for Maintenance.
2 Remove the screws G, then the grille H.
3 Remove the re-circulation filter.
4 Shake the filter to remove the loose dust. Clean the
filter with a low pressure jet of compressed air.
5 Put the filter and grille H in position, then install the
screws G.
6 Make sure that the grille is secure.
801820
Fig 81.
G GH