Specifications
Noise Data
206 206
9811-3400-4
Noise Data
Introduction
T5-008_2
To assist in compliance with European Directives 2000/14/
EC and 2005/88/EC, the noise data values for this type of
machine have been provided on the following page(s) and
may be used for the assessment of risks to exposure from
noise.
The noise data values shown only apply to CE marked
machines.
For information relating to this machine when used with
other JCB approved attachments, please refer to the
literature accompanying the attachments.
All Machines
The values shown for LpA do not apply to the canopy cabs,
ear protection must be worn.
Table 35.
Definition of terms:
LpA A-weighted sound pressure level measured at the
operator's station.
(1)
(1) Determined in accordance with the test method
defined in ISO 6396 and the dynamic test conditions
defined on 2000/14/EC.
LwA Equivalent A-weighted sound power level emitted
by the machine.
(2)
(2) Guaranteed equivalent sound power (external noise)
determined in accordance with the dynamic test
conditions defined in 2000/14/EC.
Model Engine Net Power LpA LwA
426 113 kW 73 105
436 123 kW 73 105
456 154 kW 72 109
To Next Page
Loading...
