jcb 426 - Pre-Start Cold Checks, Service Points and Fluid Levels

Routine Maintenance
Service Schedules
102 102
9811-3400-4
Pre-start Cold Checks, Service Points and Fluid Levels
Table 7. Engine
Operation 10 50
100
(1)
(1) First 100 Hours Service only, to be completed by your JCB Distributor.
100 500 1000 2000
Oil Level and Condition Check
     
Oil and Filter
Change
(2)
(2) In arduous conditions change the oil and filter after every 250 hours or three months (whichever comes first).

Coolant Change

Coolant Level Check
     
Coolant Strength and Condition Check

Air Cleaner Dust Valve
Clean
(3)
(3) Clean more often when working in dusty operating environments
  
Air Cleaner Outer Element
Change
(4)
(4) Change outer element more frequently in dusty operating environments.

Air Cleaner Inner Element Change

Fuel System For Leaks and
Contamination
Check
     
Fuel Filter Drain
   
Fuel Filter Change

Fuel Sedimenter Check

Drive Belt Condition
(5)
(5) Change if necessary.
Check

Valve Clearances Check/Adjust

External Oil Leaks Check
     