Operation
Seat Controls
27 27
9811-3400-4
Air Suspension Seat
P7-2005
Adjustments should only be made by the operator when
sat on the seat.
812070-2
Fig 14.
1 Fore/Aft Adjustment:
Lift the handle 1 and move the seat forwards or
backwards to the required position.
To lock the seat in position, release the handle 1.
2 Backrest Angle Adjustment:
Lift the lever 2 and adjust the seat to the required
angle.
To lock the seat in position, release the lever 2.
3 Damper Adjustment:
Move the damper adjustment lever 3 to get a hard or
soft suspension of the seat.
To lock the seat in position, move the lever 3 to the
forward position and the lever 4 to the rear position.
4 Fore/Aft Isolator Adjustment:
To enable the fore/aft suspension movement of the
seat, move the lever 4 to the forward position. (For
example when you move across rough ground or tow
a trailer).
To disable the fore/aft suspension movement, move
the lever to the rear position.
To lock the seat in position, move the lever 3 to the
forward position and the lever 4 to the rear position.
5 Armrest Adjustment:
To change the angle of the armrest when its lowered,
turn the hand-wheel 5. Do not apply pressure to the
armrest during this step.
To get access to the seat the armrest can be raised
fully.
6 Height/Auto Weight Adjustment (Option):
Lift the lever 6, then release it to set the automatic
weight adjustment.
Move the lever 6 until the ride height indicator 11
shows green (the comfort zone) on its display 12. In
the green band there is 75mm (3 in.) of height
adjustment for the operator.
7 Seat Cushion Depth Adjustment (Option):
Lift the lever 7 and move the cushion backwards or
forwards to adjust the distance from the base of the
backrest to the front of the seat.
To lock the cushion in position, release the lever 7.
8 Seat Cushion Angle Adjustment (Option)
Lift the lever 8 and apply or release pressure to the
spring mechanism to adjust the angle of the cushion.
To lock the cushion in position, release the lever 8.
To Next Page
Loading...
