jcb 426 - Fluids, Lubricants and Capacities; Specifications

Routine Maintenance
Fluids, Lubricants and Capacities
108 108
9811-3400-4
Fluids, Lubricants and Capacities
Specifications
Table 20.
JCB recommend that you use the JCB lubricants shown as they have been verified by JCB for use on JCB machines.
However, you could use other lubricants that are equivalent to the JCB standards and quality or offer the same machine
component protection.
Item Capacity Fluid/Lubricant JCB Pat
Number
Container
Size
(1)
(1) For information about the different container sizes that are available (and their part numbers), contact your JCB Dealer.
Litres Gal
Fuel System Diesel
- 426, 436 230 50.6
- 456 320 70.4
Engine (Oil) JCB Engine Oil EP 15/W40
(-10 to 50°C)
(2)
Caution: Do not
use ordinary engine oil
(2) If the quoted engine oil is not available, then the engine oil must be changed every 250 hours.
4001/1805 20 Litres
- 426, 436 14 3.1
- 456 18.9 4.2
Engine (Coolant) JCB HP Antifreeze HP/Coolant 4006/1120 20 Litres
- 426, 436 35 7.7
- 456 40 8.8
Gearbox
(3)
(3) The figure quoted is total system capacity. Use the 'MAX' and 'MIN' marks on the dipstick when filling the system.
JCB HP Universal ATF 4000/2305 20 Litres
- 426 27 5.9
- 436 32.5 7.1
- 456 34 7.5
Axles JCB Gear Oil LS Plus
4000/3905
(4)
(4) Must be suitable for use with oil immersed brakes and Limited Slip Differentials (LSD).
20 Litres
- 426 (Front) 39 8.6
- 426 (Rear) 37 8.1
- 436 (Both) 39 8.6
- 456E HT (Rear), 456E ZX (Both) 51 11.2
- 456E HT (Front) 69 15.2
Axles MT-l 3065, 3075, 3085 and 3095 JCB Gear Oil HP Plus 4000/2205 20 litres
- 426E (Both), 434S and 436 (Rear) 23 5.1
- 434S, 436 (Front) 456 (ZF) 35 7.7
Hydraulic System
(5)
(5) The total hydraulic system capacity depends on the equipment being used. Fill the system with all rams closed and
watch the level indicator.
JCB Hydraulic Fluid EP 46 4002/1605 20 Litres
- 426, 436 210 46.2
- 456 215 47.3
Grease Points
JCB Special HP Grease
(6)
(6) If JCB Special MPL EP Grease is used for normal greasing, all 100 hour greasing operations must be carried out at
ten (10) hour intervals.
4003/2017 400g x24
Auto Greasing System (if fitted) JCB Special MPL EP Grease 4003/1501 400g x24