EasyManua.ls Logo

jcb 426 - Emergency Exit; Glazing Breaker (if Fitted)

jcb 426
226 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Entering and Leaving the Cab
24 24
9811-3400-4
Emergency Exit
In an emergency if the door cannot be used:
1 Open the right side window (emergency exit) as far as
the retaining-strut A will allow.
2 A hard downward blow to the retaining strut
disconnects it and lets the window open fully.
The emergency exit window has a label B attached in the
position shown.
801870-1
Fig 8.
Glazing Breaker (if fitted)
If the machine has a glazing breaker C, it is possible to use
the side window as an emergency exit.
If an emergency occurs:
1 Remove the glazing breaker C from its stowage
position.
2 Use the glazing breaker to hit the side window near
the corner to shatter the side window.
3 Knock the side window out of its frame.
T033730-3
Fig 9.
A
B
C

Table of Contents

Related product manuals